2014 Caterpillar 140M2 VHP Plus Motor Grader, 10,608 Hrs Showing, 193 Hp, Caterpillar C9.3A, Diesel, Water Cooled Engine, Block Heater, Caterpillar, Hydrostatic Transmission, 6WD, 244" Wheel Base, Differential Lock, Hydraulic Brakes, Articulated Steering, 17.5R25 Front Tires, 17.5R25 Rear Tires, 168"x23", 168" Width, Yes Wheel Lean, 6 Blade Angle Range, Blade Side Shift, Front Mount Scarifiers, Heat, AC, Radio, Rear Backup Camera, Replaceable Edge, Emission: Tier 4, Operating Weight: 45,652 Lbs, Top Speed Forward: 29MPH, Top Speed Reversed: 22 MPH, Cooling System: 14.8 Gal, Hydraulic Output: 55.7 Gal/min, Blade Base 8.4', Front Ground Clearance 1.9', Ground Clearance - Rear Axle 13.3", Height - Exhaust Stack 121", Height - Front Axle Center 23.5" Height - Top Of Cab 130' Height - Top Of Cylinders 119", Height To Top Of Isomount Cab 10.8', Length - Between Tandem Axles 60" Length - Front Axle To Mid Tandem 241", Length - Front Axle To Moldboard 100", Length - Front Tire To Rear Of Machine 344", Overall Length 28.6', Rear Ground Clearance 1.2', Tandem Axle Wheelbase 5', Wheelbase 20.1', Width - Outside Front Tires 98", Width - Outside Rear Tires 98", Width - Tire Center Lines 84", Width Over Tires 8.2', Arc Radius 16.3", Blade Pull - Base GVW 24,294 Lbs, Blade Pull - Maximum GVW 31,758 Lbs, Blade Pull At Max Weight 45,787.8 Lbs, Blade Width 12', Cutting Edge Thickness 0.6", Cutting Edge Width 6", End Bit - Thickness 0.6", End Bit - Width 6", Max Depth Of Cut 28.1", Moldboard - Height 24", Moldboard - Thickness 0.9", Moldboard - Width 12', Moldboard Height 24", Moldboard Length 12', Moldboard Width 12', Side Shift Left 20.1", Side Shift Right 26", Throat Clearance 6.5", NOTE: Window On Door Is Cracked (see Pictures), Ladder Is Bent On Left Side Entrance (see Pictures), Showing A Cut On Outside Tire (see Pictures), SN: CAT0140MLM9J00888

2014 CATERPILLAR 140M2 VHP PLUS

View on www.bigiron.com

Lot #HH2020

Item #

HH2020

Year

2014

Make

CATERPILLAR

Model

140M2 VHP PLUS

Hours

10608

Capacity

14.8

Moldboard Width

100

Wheelbase

244

Tires

Front

ROPS

Enclosed

Cab

Heat

A/C

Yes

Thumb

Hydraulic

Differential Lock

Yes

Engine Manufacturer

Caterpillar

Fuel Type

Diesel

Number of Rear Axles

Tandem

Tires or Tracks

Tires

Drill Type

Pull